BXM(D) 220/380V 60-250A Explosion-proof lighting (power) distribution box Explosion-proof power distribution device
Product Description
1.The explosion-proof power distribution box is a low-voltage power distribution device that assembles switchgear, measuring instruments, protective appliances and auxiliary equipment in a closed or semi-closed metal cabinet or on the screen according to the electrical wiring requirements. During normal operation, the circuit can be switched on or off by means of manual or automatic switches. In the event of failure or abnormal operation, the circuit can be cut off or alarmed by means of protective appliances. By means of measuring instruments, various parameters in operation can be displayed, and some electrical parameters can also be adjusted to prompt or send signals for deviations from the normal working state. It is often used in various hair, distribution and substations.
2. Purpose of explosion-proof distribution box: Reasonable distribution of electric energy, convenient opening and closing of circuits. It has a high safety protection level and can visually display the conduction state of the circuit. It is easy to manage, and it is helpful for maintenance when a circuit failure occurs.
3. With the rapid development of petroleum, chemical, mining and other industries, distribution boxes are more and more widely used, and there are more and more varieties. How to prevent the accidental explosion of the distribution box in the explosive gas dangerous place has become a very important issue. Since electrical sparks are inevitably generated by the distribution box during work, once they meet the explosive gas mixture in the place, it will lead to an explosion accident, directly endangering the safety of national property and citizens' lives.
Model Description
Technical parameters and structure dimensions
1.Explosion-proof mark: ExdeIIBT4/T5/T6, ExdeIICT4/T5/T6, DIP A20 TA, T4/T5/T6;
2. Rated voltage: AC220/380V, non-standard voltage: 12V/24V/36V/127V/660V;
3. Main switch current: 10A800A; Sub-switch current: 1A630A; 4.
Protection class: IP54/IP55/IP65;
5. Thread specification: DN15-DN100/G1/2-G4 inch
; Lead-out wire specification: diameter 6mm-80mm;
7. Lead-in and lead-out direction: top in, top out, bottom in and bottom out (unlimited according to customer requirements)
Product features
1.The aluminum alloy shell is die-casting, the surface is sprayed with plastic, and the appearance is beautiful;
2. C65N, NC100H and S25□S high breaking miniature circuit breakers, M611 or GV2 motor protectors, 3VE1 air switches, CM1 molded case circuit breakers and signal lights are installed inside. ;
3. This product is a composite type, the switch box adopts a flameproof structure, the bus box and the outlet box adopts an increased safety structure, and the cavity is equipped with a sealing ring, which has good waterproof and dustproof functions;
4. This product has Overload and short circuit protection functions, leakage protection and other functions can be added according to requirements;
5-module structure, various circuits can be freely assembled according to needs;
6. Can be specially made according to requirements, such as adding surge protectors, ammeters, voltmeters, etc.;
7 .Steel or cable wiring;
8.Wall-mounted and floor-mounted, etc.
Product details
Products real shot
A corner of the production workshop
Product packaging
Product application case
